User's Manual

Table Of Contents
EKI-1361 & EKI-1362 Series User Manual 78
5.3 Command List
5.3.1 system
Usage: system
Show firmware version, device name and description.
Usage: system name [Maximum length 31 bytes]
Set current device name.
Usage: system desc [Maximum length 127 bytes]
Set current device description.
5.3.2 port
Usage: port [nn|all]
Show the “nn”
th
port or all ports information.
Usage: port [nn] desc [Maximum length 127 bytes]
Set the “nn”
th
port’s description.
Usage: port [nn|all] type [232|422|485|4485] flow [0|1|2|3]
Set serial ports’ type and flow control.
flow 0: None.
flow 1: XOn/XOff.
flow 2: RTS/CTS.
flow 3: DTR/DSR.
Usage: port [nn|all] baud [50-921600] parity [n|e|o|m|s] data [5-8] stop [1|1.5|2]
Set the serial ports’ baud rate, parity, data bits, and stop bits.
Acceptable baud: 50, 75, 110, 150, 300, 600, 1200, 1800, 2400, 4800, 7200,
9600, 14400, 19200, 38400, 57600, 115200, 230400, 460800, and 921600
Command Function Description
system Show or configure the system information
port Show or configure the serial ports information
portadv Show or configure the serial ports advanced settings
mvcom Show or configure the serial ports in Virtual COM mode
mctrl Show or configure the serial ports in Control mode (USDG)
mdata Show or configure the serial ports in Data mode (USDG)
net Show or configure the Ethernet ports settings
alarm Show or configure the auto warning functions including mail alarm and
SNMP alarm
monitor Monitor the serial ports status
mrfc2217 Show all port modes and mode information
time Show or configure the time information
service Enable or disable the web, Telnet and SNMP functions
apply Write settings to the flash memory and reboot the system immediately
exit Terminate the shell session
help Display command list help information
reboot Show all port modes and mode information
wireless Show or configure the wireless settings or informations
wirelessadv Show or configure the advanced wireless settings or informations