User's Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 2.1 Hardware
- 2.2 Connecting Hardware
- 2.3 Reset Button
- 3 Utility Configuration
- 4 Web Interface
- 4.1 Overview
- 4.2 Accessing the Web Page
- 4.3 Overview
- 4.4 Network Settings
- 4.5 Wireless Settings
- 4.6 Port Configuration
- 4.7 Monitor
- 4.8 Alarm
- 4.9 Administration
- 5 Telnet/Serial Console Configuration
73 EKI-1361 & EKI-1362 Series User Manual
4.9.7 Firmware Upgrade
To access this page, click Administration > Firmware Upgrade.
Figure 4.42 Administration > Firmware Upgrade
The following table describes the items in the previous figure.
4.9.8 Tools
To access this page, click Administration > Tools.
Figure 4.43 Administration > Tools
The following table describes the items in the previous figure.
Browse Click Browse to select the configuration file.
Import Click Import to import the configuration to the device.
Cancel Click Cancel to cancel the import function.
Load Factory Defaults
Load Default Click Load Default to have all configuration parameters reset to
their factory default values. All changes that have been made will
be lost, even if you have issued a save.
Item Description
Item Description
Browse Click Browse to select the configuration file.
Upload Click Upload to upload to the current version.
Item Description
Reboot
Reboot Click Reboot to reboot the device. Any configuration changes you
have made since the last time you issued a save will be lost.
Ping