User's Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 2.1 Hardware
- 2.2 Connecting Hardware
- 2.3 Reset Button
- 3 Utility Configuration
- 4 Web Interface
- 4.1 Overview
- 4.2 Accessing the Web Page
- 4.3 Overview
- 4.4 Network Settings
- 4.5 Wireless Settings
- 4.6 Port Configuration
- 4.7 Monitor
- 4.8 Alarm
- 4.9 Administration
- 5 Telnet/Serial Console Configuration
EKI-1361 & EKI-1362 Series User Manual 70
To access this page, click Administration > Syslogd.
Figure 4.37 Administration > Syslogd
The following table describes the items in the previous figure.
4.9.3 NTP / Time Function
To access this page, click Administration > NTP / Time.
Figure 4.38 Administration > NTP / Time
The following table describes the items in the previous figure.
Item Description
Syslogd Click Enabled or Disabled to set the logging service status.
Apply Click Apply to save the values and update the screen.
Item Description
System Time Displays the current System Time.
Manual Time If NTP Service is disabled, manually enter the NTP settings.
Settings: Year, Month, Day, Hour, Minute, Seconds.
NTP Service Click the drop-down menu to enable the NTP server.
Time Zone Click the drop-down menu to select a system time zone.
NTP Server Enter the address of the SNTP server.
Apply Click Apply to save the values and update the screen.