User's Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 2.1 Hardware
- 2.2 Connecting Hardware
- 2.3 Reset Button
- 3 Utility Configuration
- 4 Web Interface
- 4.1 Overview
- 4.2 Accessing the Web Page
- 4.3 Overview
- 4.4 Network Settings
- 4.5 Wireless Settings
- 4.6 Port Configuration
- 4.7 Monitor
- 4.8 Alarm
- 4.9 Administration
- 5 Telnet/Serial Console Configuration
EKI-1361 & EKI-1362 Series User Manual 56
4.6.3 USDG Data Mode
The EKI-1361 & EKI-1362 Series can function as either a Data TCP server or a Data
TCP client. Both operations support TCP and UDP protocol. The EKI-1361 & EKI-
1362 Series allows you to treat your serial devices as if they were networking
devices. You can issue commands or transmit data from serial devices, connected to
a EKI-1361 & EKI-1362 Series device, to any devices that are connected to the
Internet.
To access this page, click Port Configuration > Port 1 (2), and click the Operation
tab.
Figure 4.23 Port Configuration > Operation > USDG Data Mode
The following table describes the items in the previous figure.
Item Description
Mode Click the drop-down menu to select the USDG Data Mode.
Protocol Click the drop-down menu to select a protocol: TCP or UDP.