User's Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 2.1 Hardware
- 2.2 Connecting Hardware
- 2.3 Reset Button
- 3 Utility Configuration
- 4 Web Interface
- 4.1 Overview
- 4.2 Accessing the Web Page
- 4.3 Overview
- 4.4 Network Settings
- 4.5 Wireless Settings
- 4.6 Port Configuration
- 4.7 Monitor
- 4.8 Alarm
- 4.9 Administration
- 5 Telnet/Serial Console Configuration
49 EKI-1361 & EKI-1362 Series User Manual
The following table describes the items in the previous figure.
4.5.2 Advanced
To access this page, click Wireless Settings > Advanced.
Figure 4.16 Wireless Settings > Advanced
The following table describes the items in the previous figure.
Item Description
Wireless Network
Operation Mode Click the drop-down menu to select an operation mode.
SSID Enter the name to distinguish it from other networks in your
neighborhood.
BSSID Display the MAC address of the device.
Operation frequency
Country Code Click the drop-down menu to select the country code to specify
different selectable channels. Available options: US (United
States), Germany, France, China and Japan. Some specific
channels and/or operational frequency bands are country
dependent.
Channel Selection Click the drop-down menu to select Auto (default) or Manual. The
Auto selection allows the device to select a band. The Manual
selection provides access to a selection of the option band (2.4G /
5G).
Channel bandwidth Click the drop-down menu to select the band and channel
bandwidth.
Apply Click Apply to save the values and update the screen.
Item Description
Client Settings
Roam Click the drop-down menu to enable/disable the roaming function
(default: Disable). The function allows client devices to gateway
between one access point (AP) to another.