User's Manual

Table Of Contents
EKI-1361 & EKI-1362 Series User Manual 44
4.4.2.3 DHCP/BOOTP/AutoIP Network Mode
To access this page, click Network Settings > LAN.
Figure 4.9 Network Settings > LAN > DHCP/BOOTP/AutoIP
The following table describes the items in the previous figure.
DHCP Server Function is not available.
Apply Click Apply to save the values and update the screen.
Item Description
Item Description
Local Hostname Enter the device name: up to 31 alphanumeric characters.
Domain Name Enter a string to specify the domain name for the interface.
Network mode Click the drop-down menu to select the IP Address Setting mode:
Static or DHCP.
DHCP Timeout Enter a string to specify the DHCP server response time in
seconds (30: default).
DNS Click the radio button to select the DNS mode: Automatic or
Specific.
Speed & Duplex Click the drop-down menu to select the transmission parameters:
Auto-Negotiation, 100M & Full Duplex, 100M & Half Duplex, 10M &
Full Duplex, 10M & Half Duplex.
MAC Address Display the MAC address to which packets are statically
forwarded.
DHCP Server Function is not available.
Apply Click Apply to save the values and update the screen.
Note! All new configurations will take effect after rebooting. To reboot the
device, click Administration > Tools > Reboot.