User's Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 2.1 Hardware
- 2.2 Connecting Hardware
- 2.3 Reset Button
- 3 Utility Configuration
- 4 Web Interface
- 4.1 Overview
- 4.2 Accessing the Web Page
- 4.3 Overview
- 4.4 Network Settings
- 4.5 Wireless Settings
- 4.6 Port Configuration
- 4.7 Monitor
- 4.8 Alarm
- 4.9 Administration
- 5 Telnet/Serial Console Configuration
EKI-1361 & EKI-1362 Series User Manual 10
2.1.4 LED Indicators
Figure 2.5 System LED Panel
Note: Port 2 is only available for the EKI-1362-CE model.
No. LED Name LED Color Description
1.
Status Amber, blinking System is ready
Off System is not functioning
2.
P2 Green Power 2 is on
Off Power 2 is off or power error condition exists
3.
P1 Green Power 1 is on
Off Power 1 is off or power error condition exists
4.
WLAN Signal
Strength
Off No signal available
Green (One) Signal quality is less than -80 dBm
Green (Two) Signal quality is between -80 dBm and -60 dBm
Green (Three) Signal quality is more than -60 dBm
5.
Tx / Rx
P1 to P2*
Amber The serial port is receiving data.
Green The serial port is transmitting data.
Off The serial port is not transmitting or receiving data.
P1 WLAN
P2
SYS
4
1
2
3
TX
RX
1
TX
RX
2
5 6