User's Manual

3 EKI-1361 & EKI-1362 Series User Manual
1.3 Specifications
Specifications Description
Interface I/O Port
 EKI-1361: 1 x RJ45 + 1 x RS-232/422/485
 EKI-1362: 1 x RJ45 + 2 x RS-232/422/485
Power Connector Terminal block
Physical Enclosure Metal shell with solid mounting kits
Installation DIN-rail and Wall mount
Dimensions
(W x H x D)
25 x 103 x 95 mm (0.98" x 4.06" x 3.74")
Weight 315g (13.05 oz)
IP Rating IP30
LED Display System LED Power 1, Power 2, Status
Port LED
 WLAN: Quality, Link/Active
 LAN: Link/Active
 Serial: Tx, Rx
Environment Operating
Temperature
-40°C ~ 70°C (-40°F ~ 166°F)
Storage
Temperature
-40°C ~ 80°C (-40°F ~ 176°F)
Ambient Relative
Humidity
10 ~ 95% RH
Wireless LAN
Communications
Compatibility IEEE 802.11a/b/g/n
Speed Up to 300 Mbps
Antenna 2 (supports 2T2R)
Free Space
Range
Open space 100 m
Wireless Security WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise
Ethernet
Communications
Compatibility IEEE 802.3, IEEE 802.3u
Speed 10/100 Mbps
Port Connector 8-pin RJ45
Protection Built-in 1.5 KV magnetic isolation
Serial
Communications
Port Type RS-232/422/485-2w/485-4w, software selectable
Port Connector DB9 male
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Odd, Even, Space, Mark
Baud Rate 50 bps ~ 921.6 kbps, any baud rate setting
Serial Signals RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI,
GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485 2-wire: Data+, Data-, GND
RS-485 4-wire: GND, RxD-, RxD+, TxD+, TxD
Power Power Input 12 ~ 48V
DC
, redundant dual inputs
Power Connector Terminal block
Power
Consumption
2W maximum