User's Manual

EKI-6233BN User Manual 51
4.6.2 Event
The Alarm Event page allows the selection of triggers for system, DCD and DSR
events for the alarm function.
To access this page, click Alarm > Event.
Figure 4.22 Alarm > Event
The following table describes the items in the previous figure.
Read Community Enter the read-only, public, community string.
Write Community Enter the write-only, private, community string.
Contact Enter the individual designated the contact point for this event.
Location Enter the designated location/department of the setting.
Apply Click Apply to save the values and update the screen.
Item Description
Item Description
System Event
Cold Start Click the option to select a warning type when the device’s power
is cut off and reconnected.
Warm Start Click the option to select a warning type when the device is reboot.
Authentication failure Click the option to select a warning type when an incorrect
password is entered.
IP address changed Click the option to select a warning type when the IP address is
changed.
Password changed Click the option to select a warning type when the password is
changed.
LAN Interface 1 link
down
Click the option to select a warning type when the LAN Interface 1
port is disconnected.
Apply Click Apply to save the values and update the screen.