User's Manual
Table Of Contents
- 1 Introduction
- 2 Getting Started
- 3 Utility Configuration
- 4 Web Interface
- 4.1 Overview
- 4.2 Accessing the Web Page
- 4.3 Overview
- 4.4 Network Settings
- 4.5 Wireless Settings
- 4.6 Alarm
- 4.7 Administration
- 5 Telnet/Serial Console Configuration
EKI-6233BN User Manual 45
4.5 Wireless Settings
4.5.1 Basic
To a c c ess th is p ag e, c l ick Wireless Settings > Basic.
Figure 4.15 Wireless Settings > Basic
The following table describes the items in the previous figure.
Destination IP Enter the IP address of the destination address.
Protocol Click the drop-down menu to select the protocol type for the entry:
TCP, UDP, ICMP.
Source port Enter the port number of the sender IP address.
Destination port Enter the port number of the destination IP address.
Delete Click Delete to remove the entry from the Filter policy.
Add Click Add to include the entry in the Filter policy.
Apply Click Apply to save the values and update the policy.
Item Description
Item Description
Wireless Network
Operation Mode Click the drop-down menu to select an operation mode.
SSID Enter the name to distinguish it from other networks in your
neighborhood.
BSSID Display the MAC address of the device.
Operation frequency
Country Code
US is the default country setting