User manual

EKI-7626C_7626CI_Manual_ed4.doc 16
2.3.2 DIN-rail Mounting
You can also mount EKI-7626C/7626CI on a standard DIN-rail by below steps.
The DIN-rail kit is screwed on the industrial switch when out of factory. If the DIN-rail kit is not screwed
on the industrial switch, please screw the DIN-rail kit on the switch first.
First, hang the EKI-7626C/7626CI to the DIN-rail with angle of inclination. See Figure 2.6.
Figure 2.6: Installation to DIN-rail Step 1