User manual

37 Chapter 3
Figure 3.21: IEEE 802.1Q VLAN Setting
3.2.3 Address Configuration
Enable the port security function, the port with “Enable” status would
only allow the packets from the MAC address in the “MAC Security
Address Table” to ingress EKI-6538.
Figure 3.22: Port Security Configure
Users can input static MAC address for corresponding port to the table as
Fig 3.23. Each port has its independent “MAC Security Address Table”,
and the maximum MAC number of each table is 4.
Warning A. Default VLAN ID (1) couldn’t be removed.
B. The port your PC connecting can not be set as
“Tag” or “Not member”.