User manual

EKI-6538 User Manual 34
Click on the number to configure the port. Press “Apply” to save you
configuration before leave this page.
Admin
Enable: Transmit and receive packets
Disable: Reject packets transmission and reception (LED indicators
would be lit always if you do not remove the cable even though you dis-
able this function)
Auto Negotiation
Enable: Speed and Duplex are auto-negotiated by the connecting devices
Disable: Speed and Duplex must be set by manual.
Speed Duplex
Set the same speed/duplex in the network area, or the communication
may have problems.
Flow Control
Enable: When the flow is over loading, system would send out a frame to
suspend the data transmission. That will control the flow effectively with-
out packet loss
Disable: No flow control and might cause packet loss while over loading.
Default Priority
Set up the priority of the packet from this port (0~7)
Default Port VID
Add 802.1Q VLAN tag to the ingress packet without 802.1Q VLAN tag.
If the packet ingress to this port without default VLAN tag, EKI-6538
will add the VID tag to this packet as you set here.
This tag not only include the 802.1Q VLAN ID, the priority information
were included also.