User manual

3.3 Web Browser

EKI-2748FI provides a convenient configuring way via web browser. You can follow the steps below to

access EKI-2748FI.

EKI-2748FI’s default IP is 192.168.1.1. Make sure your host PC and EKI-2748FI are on the same logical

sub-network.

Warning Your host PC should be in the same VLAN setting with EKI-2748FI, or the

management will not be configured.

Connect EKI-2748FI to the Ethernet then your host PC could be configured via Ethernet. Or you can

directly connect EKI-2748FI to your host PC with a straight-through or cross over Ethernet cable.

Before to use web management, install the industrial switch on the network and make sure that any one

of PCs on the network can connect with the industrial switch through the web browser. The industrial

switch default value of IP, subnet mask, username and password are as below:

• IP Address: 192.168.1.1

• Subnet Mask: 255.255.255.0

• Default Gateway: 192.168.1.254

• User Name: admin

• Password: admin

Open Internet Explorer and type EKI-2748FI’s IP in the Address field then press Enter to open the web

Figure 3.3-1 Type the address in the URL

Figure 3.3-2 Web Login Window

The default user name and password are both admin. Fill in the user name and password and then

press OK to enter the configuration. You can change the password in the User Authentication section.

51 Chapter3