User manual

EKI-1321/1322 User Manual 52
Pack Condition: There are 3 types of pack condition by length, time or specific char-
acter. “By size”: the system will collect the data with fixed size and send out accord-
ing to your setting. “By interval”: the system will collect the data in fixed interval and
send out. “By end-character”: the system will send out the package when it find the
coming of specific character.
RVcom Number: 0 means disable RVcom function. There can have maximum of 5
peers. After EKI-132x get ready, it will connect to the specific targets automatically.
Port Data Buffering: EKI-132x series provide the function of data buffering to avoid
the data lost.
Media: There are three types. None is no data buffering. RAM is to buffer the data in
RAM storage. SD Card is to buffer the data in SD card if you plug-in the SD card in
EKI-132x series devices.
When Data Full: When buffering space is full, you can select to “STOP” or “OVER-
WRITE” the buffering data.
MAX buffering size: The storage size will be used for data buffering.
5.8.3 Setting TCP/UDP Server/Client Operating Mode Parameters
EKI-1321/1322 provides various operating modes. Selecting the “USDG Data Mode”
as below to change the mode of the port to TCP server/client or UDP mode. Before
setting the TCP server mode, you have to check the serial port setting in advance.
Protocol: TCP or UDP mode
Data Idle Timeout (10~255 seconds): The “Data Idle Timeout” setting monitors the
connection between the host and the device. If the “Data Idle Timeout” setting time is
reached, the device server will release the resources allocated to the port mapping.
This prevents a stalled host from affecting the connected device.