User manual

35 EKI-1121L/1122L/1124L User Manual
Chapter 3 Installation and Configuration
Please replace 'USERNAME' with correct user name and 'eth0' with correct interface
of Ethernet.
Fourthly, user must open and modify /var/other1/www/chap-secrets.
Please replace 'USERNAME' with correct user name and 'PASSWORD' with correct
password.
At last, user must open and modify \var\other1\www\pap-secrets.
Please replace 'USERNAME' with correct user name and 'PASSWORD' with correct
password.
Use the following command to launch the pppoe connection.
After the connection is built, a new Ethernet interface ppp will attach to system.
3.3 Partition of Flash
As mentioned before, the flash has 4 partitions: The first is used by boot loader; the
second is used by uClinux kernel; the third is used by root file system and the forth is
reserved for user use. It is about 2.6 MB, identified as /dev/mtdblock3 and mounted
at /var/other1.
"USERNAME" * "PASSWORD" *
"USERNAME" * "PASSWORD" *
/>/var/other1/pppoe-on &
Redboot 0x 0000 0000 ~ 0x 7F06 0000
kernel.lzo 0x 7F06 0000 ~ 0x 7F26 0000
jffs2fs.img 0x 7F26 0000 ~ 0x 7F7F 0000
FIS directory 0x 7F7F 0000 ~ 0x 7F7F F000
Redboot config 0x 7F7F F000 ~ 0x 7F80 0000