User Manual

The default setting is Enabled.
4.5.15 On-Chip Frame Buffer Size
The default setting is 32MB. The options available include 1MB, 4MB, 8MB and 16MB.
4.5.16 Boot Display
The default setting is CRT+LVDS. The options available include CRT, LVDS, DVI and TV.
4.5.17 Panel Number
These fields allow you to select the LCD Panel type. The setting values for these ports are:
640 x 480 18bit SC
800 x 600 18bit SC
1024 x 768 18bit SC
1280 x 1024 24bit SC
1400 x 1050 18bit SC
1024 x 768 24bit SC
1600 x 1200 24bit SC
4.6 Integrated Peripherals
This section sets configurations for your hard disk and other integrated peripherals. The first
screen shows three main items for user to select. Once an item selected, a submenu appears.
Details as follows.
The item of “Watch Dog Timer ” is special design for DSA-3400, user could change the item
to setup 10 seconds,20sec,30sec etc. User could install the WDT sample program to enable
the Watch Dog Timer for specific application.