User manual

DSA-2102SAE User Manual 8
2.1 Setting up the Player
Attach a video cable (DVI, video, S-video, or VGA) to your display
Connect and power on your display. Switch your display to the corresponding video
input mode (VGA /Video/S-video/DVI/HDMI).
 If your display lacks DVI or HDMI and requires a VGA connection, a DVI to VGA
is required.
 If your display has HDMI but not DVI, you can purchase an HDMI-DVI adapter
or cable.
 For audio output, connect the supplied stereo RCA cable from the player to your
monitor.
Connect player to your network
Connect player to your network router. Adfotain Manager Express can detect the IP
location of your player automatically on a DHCP network. See setting up Adfotain
Manager Express in this section to set up the program on your PC.
*If your network requires a static IP, you can also use Adfotain Manager Express to
set up the static IP. Please contact your network administrator if you are unsure
which IP addresses are available on your network.
Attach the AC power adapter to power on the unit
Connect the Power Adapter to a wall outlet and player.
The ? green power indicator on the player unit will immediately light up.
The player should display on screen information on your screen corners during boot
up. Wait a few moments to let the process complete.
2.2 Setting up Adfotain Manager Express
Adfotain Manager Express lets you perform player configuration, maintenance, and
scheduling operations from your PC.
Installation
Minimum system requirements