User manual

- 74 -
Installation
1. Insert VBOX-3200 CD into the CD-ROM drive of the remote workstation and run
Setup.exe in the Multi_Cam_Ap & Driver directory of CD-ROM.
2. In the setup dialog box select “IP Multicast” and click [Next].
3. Click [Browse] if you wish to specify another destination directory otherwise click
[Next] and follow the rest of the instruction to complete the installation.
6.2.2 Start and Stop IP Multicast System
Please make sure that all VBOX-3200s and the IP Multicast workstation are properly
setup in a local TCP/IP network environment. The “Multicast Server” in VBOX-3200
must be enabled first before proceeding to the following procedures.
1. In VBOX-3200’s main screen, click the [Network] button and enable “Multicast
Server” from the menu. If you are trying to connect multiple VBOX-3200s at the same
time then make sure to enable all VBOX-3200’s Multicast Server separately.
2. Go to [Start] > [Program] > [Multicam] > [IP MultiCast System] and run IP Multicast
application in your workstation.
3. Click the [Search] button from the tool bar and the IP Multicast System will
automatically locate all available VBOX-3200s within your local area network.
4. All VBOX-3200s available for viewing will be listed in the live channel frame on the
left side of the IP Multicast screen.
5. Click on the live bar to select the VBOX-3200 you wish to monitor and the password
dialog box will appear. Input a valid user’s ID and passwords then click [OK].