User manual

- 46 -
[Email-Alerts Setup]:
If the camera continues to detect motions then the system will continuously send emails to
notify you. You can specify the time interval between each email. The default time interval
is 5 minutes (configurable from 0 to 60 minutes); therefore if motions occur for more than
15 minutes then you will receive 3 emails. If motions occur for less than 5 minutes, then
you will receive only one email.
[Option]:
If you are using a dial-up modem then it is unlikely that your system will stay online
continuously. Therefore, you can use the [Auto Modem dial-up] option and the system will
automatically dial-up to the Internet when it is instruct to send email notification. The
Disconnect Delay option allows you to specify how long you want the system to stay online.
The default is 5 minutes (configurable from 0 to 30 minutes), which also give you some
time if you want to connect to the system by Webcam viewer or other remote view
applications to view the incident. The system will disconnect itself after 5 minutes or
specified time.
Video Source Setup
VBOX-3200 supports both NTSC and PAL video standards. Click [Configure] button,
select [Video Source], and use the [Video Standard] drop down menu in the dialog box to select the
correct standard for your camera.
Performance
Click [Configure] button then select “Performance” and the following menu will appear.
Preview Master: The Display speed increases because the system resource will focus on the
monitoring after clicking Preview Master icon.
Both Master: Both display and recording speed is at the average because the system resource is
allocated equally.
Record Master: The recording speed increases because the system resource will focus on the
recording after clicking on Record Master icon.