User's Manual

Page 44 / 60 DLT-V6210 Manual V1.00 Advantech-DLoG
11.7. Device dimensions
Dimensions without add-ons (in mm)
Fig. 11.2: Dimensions of DLT-V6210
11.8. Position of VESA drill holes
DLT-V6210 is designed to support VESA mount standard. VESA-compatible drilling patterns for the
RAM attachment and swivel joint brackets are located on the rear side of DLT-V6210.
Dimensions without add-ons (in mm) :
Need to use
M6
screws and the length of thread should be
between 8 to 10mm
depending on the
bracket thinkness to decide.
CAUTION
Risk of injury due to using unsuitable mounting apparatus.
To ensure that the device can be mounted and secured safely, must follow this instruction to
select the suitable apparatus.