User's Manual

Table of contents
1. IMPORTANT INFORMATION ABOUT DLT-V6210
MANUALS
5

1.1. Available manuals (in printed form and on the
Internet) 5

1.2. Design elements in the
manual 6

2. FUNCTIONAL
DESCRIPTION
7

2.1. Intended
use 7

2.1.1. Requirements for safe
operation
7
2.1.2.
 Permitted environmental
conditions
7
2.2. Mount, operate and service the device
correctly 8

2.3. Warranty
conditions
8

2.4. Device identification/name
plate 9

3. INFORMATION
9

4. EXPLANATION
9

5. DLOG
GMBH
9

3. UNPACKING, TRANSPORT AND
STORAGE
10
3.1.
 Unpacking
10

3.2. Transport
10

3.3. Storage
10

3.3.1. Protection of touchscreen during
storage 10
3.4. If return/repacking is
necessary
11

4. DEVICE CONFIGURATION USING SOFTWARE
TOOLS
12

4.1. Configuring the front keys, automatic shut down,
etc. 12

4.2. Wi-Fi configuration
(optional)
12

4.2.1. Radio wave emission
hazards 12
4.2.2. Antenna solutions for use in
Ge
rmany
13
5. MECHANICAL INSTALLATION AT THE DEPLOYMENT
LOCATION
14

5.1. Safety notice – observe before
installing
14

5.1.1. Correct installation
location 14
5.1.2.
 Secure
attachment
15
5.1.3.
 Handling the
device 16
5.2. Recommended sequence for the mechanical
installation
17

6. ELECTRICAL INSTALLATION, CABLE CONNECTION,
CABLE
COVER
18

6.1. Safety notice – observe before
connecting
18

6.1.1. General
18
6.1.2.
 Installing the disconnecting
device 18
6.1.3. Installation of DLT-V6210 on automotive
obj
ects 19
6.2. Preparations
20

6.2.1. Material
required 20
6.3. Inserting the rubber seal in the cable
compartment
21

6.3.1. Plugging in and screwing on the power supply
cable 22
6.3.2. Securing the ground using ring tongue to the ground
bol
t 23
6.3.3. Securing the power supply cable to the strain relief
ra
il 24
6.4. Connecting the USB, Ethernet and COM
cables 25

6.4.1. USB
cable 25
6.4.2.
 Ethernet
cable 26
6.4.3.
 COM
cable 26
6.5. Closing off unused cable
openings
27

6.6. Attaching the cable
cover 27
