User's Manual

Page 30 / 60 DLT-V6210 Manual V1.00 Advantech-DLoG
7.3. Front keys and LEDs
7.3.1. Overview
Fig. 7.2: Operating elements: Front keys and LED
NOTICE: Physical damage
Improper operation can cause damage and downtimes to DLT-V6210 and to the
connected complete system.
Operators of DLT-V6210 must be trained in the handling of the device.
7.4. Operating states
Status of LEDs DLT-V6210 status
Supply voltage
(green)
OFF
Waiting for a new ignition signal or activation
of the <Power> key after switch-off; no
voltage supply
STATIC ON
Computer start-up/normal operational
state/shutdown delay time
Blinking : 0.2 sec. on / 0.8 sec. off Temperature sensor faulty
Blinking : 0.5 sec. on / 0.5 sec. off
Ambient temperature lies beyong the
permitted range, i.e. < -30 or > +50 °C
Keys:
- Power on/off
- LCD Brightness up
- LCD Brightness down
LED:
System Status LED Status
System power on Static
System power off Off
System over/under
tempertuare
Blinking
0.2 sec. on / 0.8 sec. off
System thermal
sensor faculty
Blinking
0.5 sec. on / 0.5 sec. off