User's Manual
Adva
ntech-DLoG DLT-V6210 Manual V1.00 Page 29 / 60
7.2. Operating the touchscreen
NOTICE: Physical damage
Improper operation can cause damage and downtimes to DLT-V6210 and to the
connected complete system.
Operators of DLT-V6210 must be trained in the handling of the device.
P
revent damage to the touchscreen
Keep the touchscreen clean.
Do not touch the touchscreen with pointed, sharp, rough or hard objects, e.g. ball point pens, writing
implements, tools of any kind (e.g. screwdrivers).
Make sure that no adhesives get on the surface of the touchscreen.
Ensure that the touchscreen surface is not influenced by high voltages or static electricity.
Do not use excessive force when touching the touchscreens, and do not hit or press hard.
If the device with the touchscreen is placed down: Place a clean, soft cloth underneath.
Operating the touchscreen
Clean, dry fingers.
Clean, dry, soft gloves.
Suitable touch stylus with capacitive (electrically conductive) tip.
NOTICE: Physical damage
Salty water on the PCT touchscreen can be interpreted as a "touch" and lead to malfunction.
Mu
lti-touch capability
Depending on the installed operating system type, the PCT touchscreen of DLT-V6210 is multi-touch
capable. This means it can detect two touch points simultaneously.