User's Manual

General Device Configuration
DLT-V72 Series User Manual V2.74
85 / 189
9.6. MPair
With the help of the MPair application Bluetooth® capable 2D scanners can be
connected to the terminal by scanning an onscreen barcode.
NOTE
This function is only available for industrial computers of the DLT-
V72 and DLT-V83 series, which are equipped with the WLAN-Card
SPARKLAN WPEQ-261ACN (BT).
MPair supports the following operating systems.
• Windows 10 IoT Enterprise 2016
• Windows 10 IoT Enterprise 2019
• Windows 10 IoT Enterprise 2021
NOTE
MPair only supports the connection of scanners with the Bluetooth®
profile SPP “Serial-Port-Profile”. USB-HID Bluetooth® connections
are not supported by MPair.
For a more detailed description of the configuration to be made and the handling of the
MPair application, please refer to the separately available ADLoG Config manual v530
(or higher) from our homepage.
www.advantech-service-iot.eu -> Downloads -> Service -> Paperwork -> Manual