User's Manual

Operating the DLT-V72
DLT-V72 Series User Manual V2.74
74 / 189
8.6. Operating states
LED status
DLT-V72 status
Supply voltage
Temperature
OFF
OFF
Initial state, idle time – waiting for a new
ignition signal or for the POWER button
after switch-off; no voltage supply
OFF
FLASHING
Temperature sensor faulty
FLASHING
OFF
DLT-V72 is in standby mode (S3)
OFF
ON
Computer will only start if the temperature
in the device is in the range between -30
and +59 °C again.
ON
OFF
Computer start-up/normal operational
state/shutdown delay time
ON
ON
Screen defroster active
ON
FLASHING
Ambient temperature lies outside of the
permitted range, i.e. < -30 or > +50 °C