User`s manual

Common mistakes in usage
MTC 6 Series User’s Manual V2.00 81
15. Common mistakes in usage
15.1. Power supply
• Do not connect MTC 6 devices to an AC power supply.
• Observe correct voltage ranges.
15.2. Powering up/down
• Please note that the function of the MTC 6’s <Power>-key varies depending on how
the device is configured.
• Only disconnect the computer from the power supply after the computer has been
properly shut down and switched off. Otherwise file errors may occur on the
storage device (in operating systems that have no activated write protection filter).
15.3. Cable cover
• The supplied cable cover for the external ports must be installed prior to using the
MTC 6.
• In order to comply with protection class, please use the optionally available
assembly kit from DLoG.