User`s manual

Operating system
MTC 6 Series User’s Manual V2.00 69
9. Operating system
9.1. Pre-installed on Flash
When a MTC 6 with a pre-installed operating system is started, this operating system is
loaded following the BIOS boot messages. System-specific device drivers – such as
those for graphic, sound, network and touch screens – are also pre-installed.
In MTC 6 units with a pre-installed operating system, the system is located on the
C partition.
9.2. Installing on Flash
When a MTC 6 is started up for the first time without a pre-installed operating system, the
user needs to carry out a number of steps that will vary depending on the system to be
installed. Refer to the relevant operating system manual for specific instructions.
NOTICE:
Property
damage
The installation and configuration of the operating system should
only be carried out by professionals familiar with the system
environment.