User`s manual

Operation
68 User’s Manual V2.00 MTC 6 Series
8.3. Operating states
The following operating states are possible for the MTC 6:
Status of internal LEDs
MTC 6 status
Power (green) Temp (red)
OFF OFF
Initial state, idle time - waiting for a new ignition
signal after switch-off; no power supply
OFF FLASHING Temperature sensor malfunctioning
FLASHING OFF MTC 6 is in stand by mode (S3).
OFF ON
The computer will not start until the temperature
inside the unit is between -30 °C and +62 °C
again.
ON OFF
Computer is starting up; normal operational
state; shutdown delay time is running
ON ON
Temp. < -30 °C or Temp. > 70 °C
ON FLASHING
Temperature sensor malfunctioning;
automatic switch-off software configuration