User`s manual

Mounting
60 User’s Manual V2.00 MTC 6 Series
7.4.2. Position of the MTC 6 in the vehicle
In the vehicle, the driver's field of view must be kept free.
If a keyboard and scanner should be installed on the MTC 6, please plan sufficient
space.
No part of the MTC 6 system may project beyond the vehicle.
Figure 7.2: Position of the MTC 6 on a forklift
7.4.3. Overview assembly steps
Before fastening the MTC 6 to the vehicle:
• the shutdown automation must be configured
• the forklift must be prepared (connection to ignition, correct voltage, etc.)
We recommend the following installation sequence:
• Step 1: Fasten the bracket to the vehicle
• Step 2: Install MTC 6 to the bracket
The MTC 6 may not project
outside the vehicle!