User`s manual

Initial operation
48 User’s Manual V2.00 MTC 6 Series
5.6.1. DC voltage supply connector
Version: Phoenix Combicon, 3-pin.
External view:
Figure 5.9: Exterior view of the DC power supply connector
Explanation:
Ignition on means that a control signal has to be routed to this connection (e.g., ignition
of a vehicle), that matches the supply voltage level and is able to supply at least 1 W to
the MTC 6.
The signal reference is DC-.
5.6.2. Power supply cables
Use only original power supply cables from Advantech-DLoG
Advantech-DLoG power cables meet the specific requirements for
low-temperature flexibility, UV resistance, oil resistance, etc.
• Use only original power supply cables from Advantech-DLoG.
If other power supply cables are used:
• The user/operator of the industrial PC is solely responsible for the
resulting damage.
• All warranties by DLoG GmbH are voided.