User`s manual

Initial operation
44 User’s Manual V2.00 MTC 6 Series
5.2.3. Summit Client Utility for WLAN configuration
The Summit Client Utility (called "SCU" below) is used to set up the WLAN configuration
for the MTC 6.
WARNING
WLAN configurations may only be modified by qualified
IT technical staff.
Start the SCU with a double press on the SCU icon on the desktop:
Figure 5.3: Summit Client Utility Icon
Alternatively, you can also start the SCU with one of the following procedures:
• From the Start menu: Start | Programs | Summit | Summit Client Utility.
• Or from the Wi-Fi icon on the Control Panel, which you can reach from Start |
Settings | Control Panel:
Figure 5.4: Wi-Fi Icon in Control Panel