User`s manual

Basic safety guidelines
MTC 6 Series User’s Manual V2.00 9
2.6. Connect / disconnect external devices
NOTICE:
Property
damage
Disconnect the industrial PC from the power supply before
connecting / removing peripheral devices (this does not apply
to USB devices)
Otherwise considerable damage could be caused to both the
industrial PC and the peripheral devices.
• Make sure that peripherals with their own power supply are either
switched on at the same time as the industrial PC or after the
industrial PC is switched on.
• If you don‘t do this, you must ensure that a backflow from the
external device to the industrial PC cannot take place.
Only use authorized accessories
• Only use the cables, power packs and other accessories that
have been tested and approved for the respective industrial PC
by DLoG GmbH.
• Ask your Advantech-DLoG sales representative about authorized
accessories.