Instruction manual

Settings
58 Manual V3.10 DLoG Config
17.1. Command lines parameter IMPORT (only for administrators)
The parameter IMPORT is available for import using batch job (DLoG Config V 2.3 and
higher).
Example: DLoGCfg IMPORT=<Path>AnyExportedData.cfg
The CFG file to be imported must be generated using export from DLoG Config.
The CFG filename must contain the entire path (or at least ".\" for the current directory).
Other parameters for control of the batch import are:
NONET The data from the config module "network" will NOT be imported
STATNET Static IP addresses will be imported and set during batch import.
Default: Static IP addresses will NOT be imported.
Please note:
• To activate the imported data the computer must be restarted.
• Output redirection functions in a file with ">", however the output is still additionally
written to the console window.
Caution:
Property
damage
NO warning/request appears when using the COM2!
NO warning appears with information about the non-permitted
mixing of configurations between AC and DC devices.