Instruction manual

Settings
DLoG Config Manual V3.10 57
Caution:
Property
damage
During import not all data is checked for validity; rather the data is
saved in the way that it is defined in the import file. False
information could lead to failure of DLoG Industrial PC (such as
malfunctions, data loss, equipment damage etc.).
Load
factory defaults
Here default settings can be loaded that are saved in a file
named FactoryDefault_<Serial number>.cfg.
This file can only be generated by DLoG service with a
DLoG-internal program.
The AC–DC configuration warning does not appear, as it is
assumed that this is taken into account at installation.
If the file is not available, an error message about a 'defect'
file appears.
Common
Show/hide the software
keyboard automatically
on input fields in
DLoG Config
The software keyboard starts automatically when DLoG
Config is started. When the cursor is placed in an input
field, it is always displayed.
A file named Keyboard.cfg must exist in the software
keyboard installation directory; otherwise an error
message appears.
If the keyboard is started by DLoG Config, it is also
terminated when DLoG Config is closed. The software
keyboard version 1.5 or higher is mandatory for this.
An error message is displayed when errors occur.
The message is only visible after logging on.
Warning with
query on import
of static network data
(computer name,
IP addresses)
If static IP addresses (when DHCP is disabled) and/or a
computer name are imported, a warning with
corresponding security query may appear.