Instruction manual

Settings
56 Manual V3.10 DLoG Config
Allow read access without password:
Reading all data DLoG Config can be started without a password. It is possible
to read all data, but no changes may be made to the settings.
Limited to data
without COM port
access
A password is not required to start DLoG Config. Reading of
data is limited: The Environment, Automatic Switch-off and
Front Panel menus are not available.
Language
Language
setting
The language of the DLoG Config menus is defined. The
default is always the system language of the computer. If no
language file is available for this language, texts will be
displayed in German. Only those languages may be selected
for which language files (DLoGCfg*_*.txt) are available in the
Config EXE directory.
Defaults
Export
customer
settings
With this function, all DLoG Config settings can be exported to
a Config text file. Each export file is displayed with an info
header (see 17.2 Info header).
The export file can be imported to other DLoG Industrial PC to
maintain identical settings on all computers.
Import
customer
settings
Those files generated with the export function can be selected
for import. It is not possible to import the local
Config_Local.cfg. Before the import, a message tells you not
to mix AC–DC configurations, as this can block the device.
In the event that a mandatory software key for activating
diverse options on a PC is missing, this is reported in a
corresponding error message.
Please note: If options are released in the imported Config
setting, which are missing on this DLoG computer, a
corresponding error message is displayed.