Instruction manual

File Based Write Filter
50 Manual V3.10 DLoG Config
16.2. FBWF Configuration
The File Based Write Filter (FBWF) offers the possibility to protect a partition from
changes. In contrast to the Enhanced Write Filter (EWF), the FBWF filters on a file
basis and offers many additional options for configuration. The cache for intermediate
storage of the changes can be set for between 64 and 1024 MB.
Current Configuration
The currently valid FBWF settings are displayed.
Configuration after restart
Write protection enabled Enable FBWF; the computer must be rebooted to
activate the settings.
Maximum size of the
cache
Memory size available for the overlays. Entries between
64 and 1024 MB are possible.
Pre-allocation of
complete cache
memory
Maximum memory is not dynamic, but statically reserved
in advance.
Compress cache
memory
Memory content is compromised
Show warning info
over a charging level of
Enter the percentage load factor of the reserved memory
at which the warning message should be displayed.
Protected drives
Add/Remove
The hard drives listed here are protected from changes.
After clicking on Add or Remove, a list of hard drives is
displayed.
• When the desired configuration is complete: Don't forget to save the settings.