Instruction manual

Enhanced Write Filter
48 Manual V3.10 DLoG Config
The computer's EWF drives are displayed in the EWF Drives field (there is usually only
one). The settings below apply to the EWF drive selected here.
Set boot command (BootCmd)
No command The set boot commands are deactivated again.
Activate write protection
(ENABLE)
Activates write protection: All system changes are written
exclusively to the main memory; they are discarded when
the computer is restarted.
To activate this setting, reboot the computer!
Deactivate write protection
(DISABLE)
Disables write protection.
To activate this setting, reboot the computer!
Deactivate and take over
(DISABLE+COMMIT)
This setting is a combination of Deactivate write
protection and Take over changes: Write protection is
deactivated; changes are applied.
Take over changes Temporarily deactivates write protection in order to
commit current changes to the system. Once finished,
write protection is immediately active again.
• Click Set Command to apply the settings.
• Click the Exec. Restart button to restart the computer and activate the settings.