Instruction manual

WLAN
DLoG Config Manual V3.10 43
13.5. WLAN status window and radio cards
The WLAN status window works exclusively with radio cards which support WMI. The
WMI class is configured in "config_local.cfg" in the line "Noiseselect_01".
The WMI selection string in the format: NoiseSelect_XX=Card-Name,SELECT * ....
For XX, substitute a number from 01 to 20; at most 20 different WLAN cards can be
supported .
For the card name, a few characters at the start of the WLAN adapter name are enough
(not case sensitive).
The full SELECT string is then specified, separated by a comma.
13.6. Write WLAN log file
To optimize the WLAN network, or e.g. to analyze errors in roaming, a WLAN log file can
be generated using the DLoG Config program.
1. For this, edit the Config_local.cfg file in the DLoG directory of the Industrial PC
(e.g. with Notepad).
2. The entry
"Debug_Logging=0"entry is located by default in section CfgWLANStatus
0 means: no log file will be generated.
1 means: a log file will be generated and written to the DLoG directory. Filename of
the log file: WLAN_DebugLog.txt.
3. Restart the computer to activate the setting and generate the log file.
Caution:
Property
damage
Only generate WLAN log files temporarily
for analysis purposes.
Afterwards make sure to set the "Debug_Logging" entry to "0".
Otherwise system errors are a threat, since if the EWF is
deactivated storage media will be filled with log files (size of a
WLAN log file: up to 50 MB. When this size is reached, the DLoG
Config automatically creates BAK files, which are sequentially
numbered.)