Instruction manual

Network Startup
DLoG Config Manual V3.10 37
IP address for startup check
Automatic selection
(DNS or WINS server)
of network adapter
The desired network adapter can be specified here.
Possible selections are:
- All adapters
- COM2 VPN adapter
- IntelR PRO / 100VE Network Connection
Include default gateway in
check
If this checkbox is checked, then the default gateway is
also included when searching for an IP address.
Manual input of the server
address
If a server address is specified here, the programs are
only started when the DLoG computer has established a
connection to that IP address.
Maximum ping time Time to wait for a response after running a ping.
Block input until
connection established
Until the network connection is established, no input can
be performed on the computer.
Show waiting dialog A waiting dialog can be shown, optionally with network
information and in full-screen mode.
Stop waiting after ...
seconds
If no network connection has been established, the wait
can be stopped after the time given here.
Then start programs
without network
The programs can also be started without a network
connection.
Info text in waiting dialog The text entered here will be displayed on the waiting
dialog.