Instruction manual

Front Panel
DLoG Config Manual V3.10 25
9. Front Panel
In the Front Panel menu, the keys (also called soft keys) located on the DLoG Industrial
PC front panel can be programmed.
This does not apply to the keys Power on/off, +/- Brightness and Backlight on/off!
All keys depicted in grey/white can have two assignments. Use <SHIFT> to switch
between the assignments.
Character strings cannot be assigned to single keys. Only one character per key is
possible. The keys <Alt>, <Ctrl> and <Shift> may be used in combination, e.g. <Ctrl>
<Alt> <F1>.
9.1. Configuration dialog on DLoG MPC, IPC, ITC
Figure 9.1: DLoG MPC, IPC and ITC Front Panel menu