Instruction manual

Automatic Switch-off
22 Manual V3.10 DLoG Config
8.2. Configuration dialog on DLoG MTC 6
Caution:
Property
damage
Each DLoG MTC 6 has been equipped with an automatic shutdown
function. This function has been pre-configured for vehicle use
already and governs the power-up and shutdown procedures for the
DLoG MTC 6 connected to a car ignition.
The automatic shutdown settings for DLoG MTC 6 devices that are
not going to be installed into a vehicle must also be correctly set for
the device type!
Figure 8.3: Automatic Switch-off menu on DLoG MTC 6
Don’t forget to save these settings with the Save button.