Instruction manual

Automatic Switch-off
20 Manual V3.10 DLoG Config
8.1.2. Switch-Off
with ignition Only for DC devices with automatic switch-off:
Automatic switch-off is activated when the ignition
is switched off.
with ignition
and power key
Only for DC devices with automatic switch-off:
Automatic switch-off is activated when the ignition is switched
off. The power key shortens the defined after-run time and
initiates computer shutdown.
with power key The computer is shut down or switched off with the power key
(if no automatic switch-off is available, a 'hard' switch-off
takes place).
only by system
shutdown
The computer cannot be switched off using the ignition or the
power key; it has to be shut down in the Start menu.
Shutdown
to hibernation mode
If the computer is switched off using the ignition or the power
key, it goes into hibernation mode. When this happens, a
copy of the main memory is written to a file, accelerating the
startup of the computer. This option must be activated in the
power management centre of the computer (Power
Properties).