Instruction manual

Automatic Switch-off
18 Manual V3.10 DLoG Config
Show taskbar icon Selecting this options creates a symbol for DLoG Config in
the taskbar.
The symbol indicates the power status as follows:
Green: Power status is OK; ignition is on.
Flashing yellow and red: The ignition has been
switched off and the after-run time is counting down.
Red: The computer is in shutdown or switch-off mode.
Unable to read power status.
Double-click or right-click with the mouse to open a popup
menu where DLoG Config can be started.
Show counter if
ignition is off
A small dialog is displayed in the foreground where a counter
counts down the after-run time until shutdown. Depending on
the option Block input, a Shutdown button is also shown
that allows the user to immediately start the shutdown.
Hide desktop
completely
The displayed counter dialog is opened in Fullscreen mode,
covering the entire desktop. Large, easy-to-read text is
displayed automatically.
Info output for
the switch-off
Enter any text here for the after-run time counter and the
shutdown process. A line break in the text can be entered
with '\n'.
The after-run time counter is defined in '$m' for minutes and
'$s' for seconds. These text codes are case-sensitive.
Ignition off Text for the display time
Shutdown Text for the display time