Instruction Manual
Modbus
UART
The UART page allows users to conguration the UART settings. The UART settings must to match
with the settings on the attached Modbus RTU device.
Item Description
Baud Rate
Click the drop-down menu to select the transmission speeds of the
connected devices.
Parity
Click the drop-down menu to select the method of detecting errors in
transmission.
Data Bits
Click the drop-down menu to select the number of data bits in each
character.
Stop Bits
Click the drop-down menu to select the end of every character allows the
receiving signal hardware to detect the end of a character.
Modbus RTU Read
The Modbus RTU Read page allows users to conguration the Modbus Read settings.
Item Description
Enable Click the check box to enable the Modbus Read command function.
Slave ID Enter the value to dene the unique unit address of Modbus slave.