Instruction Manual

Sensor
Digital/Analog Input
The Digital/Analog Input page allows users to conguration the DI/AI settings.
Item Description
Interval of Sync.
Sensor Data (sec.)
Enter the value to dene the interval denes how often the LRPv2 node
reads DI/AI data.
Analog Input
Set the setting for the analog inputs:
• Mode: Click the drop-down menu to select AI measure mode.
• Negative: Click the check box to set enable if the analog input may be
negative value possibly.
• Value: Display the analog input value.
Digital Input
Set the setting for the digital inputs:
• Enable: Click the check box to enable to read DI data or not.
• Value: Display the digital input value.
Digital Output
The Digital Output page allows users to conguration the DO settings.
Item Description
Digital Output Click the radio button to write a High or Low value to a digital pin.