Instruction Manual

Startup Guide
LoRaWAN Node BB-WSW Series
Industrial LoRaWAN Node
Certication
CE
This product has passed the CE test for
environmental specications. Test conditions for
passing included the equipment being operated
within an industrial enclosure. In order to protect
the product from being damaged by ESD
(Electrostatic Discharge) and EMI leakage, we
strongly recommend the use of CE-compliant
industrial enclosure products.
FCC Class A
Note: This equipment has been tested and
found to comply with the limits for a Class
A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual,
may cause harmful interference to radio
communications. Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may cause
undesired operation.
Caution: Any changes or modications not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate this equipment. This transmitter must
not be co-located or operating in conjunction
with any other antenna or transmitter.
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with minimum distance 20 cm
between the radiator & your body.
Package List
• 1 x Industrial LoRaWAN node
• 1 x Antenna
• 1 x Cable (BB-WSW2C42 with 2 x cable)
Overview
advantech-bb.com
Intelligent Edge Node - Wireless LoRa
Status/Sleep/Reset
Status
1
2
3
4
No Item
1 Antenna slot
2 Status LED
3 Cable conduit
4 Status/Sleep/Reset button
Buttons and LED
The device includes a multifunction button. The
various functions are described as follows:
• To display the status function, press the
button for less than 3 seconds.
■ If LED blinks in 3 second intervals, the
device is in sleep mode.
■ If LED lights solid in 3 second intervals,
the device is in operations mode.
• To change modes from sleep to operation,
press the button between 5 and 15
seconds.
• To reset to factory default settings, press
the button for more than 15 seconds.