User`s manual

52 AWS-8259 User's Manual
2.2 DC Output Current:
Table B-2: DC output current load range
Note:
1.) Noise Test: Noise bandwidth is from 10Hz to 20 MHz.
2.) Add 0.47 µF ceramic capacitor /10 µF tantalum capacitor at
output connector terminals for ripple & noise measurements.
3.) Main O/P shall be enabled by pulled "remote" pin to TTL low
level, and disabled by pulled "remote" pin to TTL high level.
2.3 Dynamic Output Characteristics:
2.3.1 Rise Time: +5V O/P voltage rise from 10% of normal to
within regulation should be less than 25 mS.
2.3.2 Turn-on Delay Time: 1S max. at any condition. AC input
with respect to +5V.
2.3.3 Hold Up Time: 17mS min. for +5V output at 115Vac, AC
zero cross 60Hz, max. load.
2.3.4 Overshoot: Any overshoot at turn on or turn off shall be
less than 10% of the normal value.
daoLV21 V21 V3.3V5.xaMV5/V3.3
W42.niMA5.0A3.0A1W001
.xaMA2A7A51
W05.niMA2A3.0A1W081
xaMA61.4A82A25.71
W08.niMA2A3.0A1W081
.xaMA66.6A82A25.71
W001.niMA2A3.0A5.1W081
.xaMA33.8A82A25.71
W051.niMA5.0A3.0A2W041
.xaMA5.21A82A25.9
W081.niMA5.0A01A8W011
.xaMA51A81A01