User manual

ARK-DS762 User Manual 20
 AMT Configuration
Configuration Active Management Technology parameters.
– Intel AMT: Enable/Disable Intel(R) Active Management Technology BIOS
Extension.
– Note: iAMT H/W is always enabled. This option just controls the BIOS exten-
sion. If enabled, this requires additional firmware in the SPI device.
– BIOS Hotkey Pressed: OEMFLag Bit 1: Enable/Disable BIOS hotkey press.
– MEBx Selection Screen: OEMFLag Bit 2: Enable/Disable MEBx selection
screen.
– Hide Un-Configure ME Confirmation: OEMFLag Bit 6: Hide Un-Configure ME
without password Confirmation Prompt.
– MEBx Debug Message Output: OEMFLag Bit 14: Enable MEBx debug mes-
sage Output.
– Un-Configure ME: OEMFLag Bit 15: Un-Configure ME without password.
– Amt Wait Timer: Set timer to wait before sending
ASF_GET_BOOT_OPTIONS.
– ASF: Enable/Disable Alert Specification Format
– Activate Remote Assistance Process: Trigger CIRA boot.
– USB Configure: Enable/Disable USB Configure function.
– PET Progress: User can Enable/Disable PET Events progress to receive
PET events or not.
– WatchDog: Enable/Disable WatchDog Timer.
Figure 3.7 AMT Configuration setup screen