User manual

ARK-4180 User Manual 50
6.1 Introduction
If you want to completely disassemble the ARK-4180 embedded box computer, fol-
low the step-by-step procedures below. Users should be aware that Advantech Co.,
Ltd. takes no responsibility whatsoever for any problems or damage caused by the
user disassembly of the ARK-4180 embedded box computer. Make sure the power
cord of the ARK-4180 embedded box computer is unplugged before you start disas-
sembly.
1. Unscrew the 6 screws on the Top side, the red mark indicates M3 screws and
the yellow mark indicates M2 screws.